I've always been a proponent of learning as much as you can about a subject before running off and buying more equipment and photography is no different. A lot of times people think they can't take great photos without having great equipment but I've found that you can do a great deal by KNOWING what you're doing first. Years ago when I skated we'd go to Woolworth's and buy a pair of Roller Derby Phantoms to which we'd replace the liner with a Reidel or Rollerblade version, replace the wheels and bearings then tear up the track. Whomever just got owned would always come up and ask what we were skating on which we'd respond with "Roller Derby Phantoms, I got them from Woolworths for $39". Perhaps this caused a few people to give up on their dreams and live out their days serving 7 layer burritos at Taco Bell if you believe in the Butterfly Effect - I don't know. Anyway my philosophy is this.

"Be as good as you can with what you have and only replace it when IT becomes the limitation"

I live this with my photography. Sure a DSLR will take better photos than a point and shoot, nobody's arguing that. However, if you can't aim a point and shoot at a subject and make art out of it then it's doubtful that something as complex as a DSLR will help you any. Most point and shoot cameras will take decent photos within context. That context usually has to do with lighting and depth of field. With a small sensor they just can't take in enough light so anything over about 200 ISO they're done. They also have a very wide depth of field and the recent trend of adding wide angle lenses to them has made this worse. It's nearly impossible to do those very dramatic narrow depth of field closeups using a point and shoot camera with a wide angle lens. Other issues they have depend on the make of the camera but I'll list the general ones and attack them one at a time

  1. Noise at any ISO above base
  2. Limited zoom
  3. Purple fringing
  4. Inaccurate white balance
  5. Color blowout
  6. Overexposure

1. Noise: Because of their small sensors they struggle at taking photos in low light conditions so don't. That's right, just don't do it. If you have to then manually set your ISO as low as it will go then place the camera on a tripod and fire the shutter using a timer. My Jobi Gorillapod has allowed me to capture some great nighttime shots because it will stick to about anything. At least two of the shots in the gallery below would not have been possible without it. 

2. Limited Zoom: get closer or take the cleanest shot possible and crop. That's really what it comes down to. A zoom provides optical magnification which your point and shoot may not have. Optical is always better than taking a large photo and cropping it because the magnification is being done in the lens thus leaving all your pixels to still take in light. If you take a photo and crop it to simulate a 4x zoom with a 10 MP photo you'll end up with a 2.5 MP photo that's not very sharp. This is the limitation so you'll have to live with it.

Purple Fringing

3. Color Fringing: There's not a lot you can do besides avoiding the types of photos where it's prevalent ie. leaves backed by sky. The photo to the right shows fringing around the leaves.



4. Inaccurate White Balance: Light metering in point and shoot cameras leaves a lot to be desired and has to do with the software in the camera more than anything else so two cameras using the same sensor may not be equal in this regard. There's a simple solution that most cameras allow. Take the whitest piece of paper you can find and hold that in front of the image you're wanting to photograph and select "Evaluate White Balance" in your settings. Even cheap point and shoot cameras usually have this. This will tell the camera to change settings so the sheet of paper is considered white. This works really really well and I can't recommend it enough. This is especially useful for taking indoor shots under artificial lights because they're all different. I recommend this setting over changing to the pre-configured Tungsten, Fluorescent or other settings. Just remember to change it back when you're move to a new lighting condition. You may even do this several times during shooting to let it recalculate. 



5. Color Blowout: What I mean by this is some cameras prefer certain colors over others. This is a designed in feature of the camera manufacturer to satisfy the point and shoot market. Manufacturers of cameras designed for the common non-photographer folks like to make cameras that output bright over-sharpened photos with punchy colors because this is what consumers want. However, seasoned photographers know this isn't a good base to start your post processing with. It's better to have an image closer to raw so you can do the processing yourself. 

Just keep this in mind when you take photos. The photo of a rose to the right was taken by my Canon S90 which is one of the best point and shoot cameras you can but. The rose is really peach colored so you can see how bad the camera mangled it.


Over exposure

6. Overexposure: This is a real problem on a point and shoot because their sensors are so small and have very limited dynamic range. If your camera has auto-exposure bracketing (not likely) then turn it on. This takes three photos every time you press the shutter button at different exposures. This will allow you to choose the right one later or possibly even combine them in HDR software to make one High Dynamic Range image. If your camera doesn't have auto-exposure bracketing you might want to see if you can assign exposure settings to a hot button (ie. on Canon it's the print button) so you can take a photo, adjust exposure and take another quickly.  In more cases than not you'll be adjusting down and not up. I take most of my point and shoot photos at -2/3 exposure. Experiment and take lots of photos with different settings to see what works. You can always decide later what to keep.


With all of that in mind you can take decent photos with your point and shoot. I've had photos published in magazines that were taken with a 3.2 MP point and shoot camera with a 2x zoom. It IS possible. 

Why not just go to a DSLR?

I still carry around a point and shoot camera although a higher end one - Canon S90 because I can get it in my pocket. A camera that I have on me is a camera I'll take photos with. A bulky DSLR left at home will never get used. I will probably be replacing the S90 with an S100 or doing more research on the Canon G1X even though it pushes my envelope of what I want to carry around.

The moral of the story is learn how to use all the features of your camera and don't be afraid to experiment. The photo at the beginning of this article was taken using the gorillapod, a two second shutter and the exposure on the pre-configured Fireworks setting. 

 Point and Shoot Photo Gallery: click for lightbox