Note: updated for XCP 1.5b/1.6 and Xenserver 6.x

Install Type


  • XCP/Xenserver
  • Access to Internet
  • Working DHCP server
  • Working DNS name resolution


This tutorial was originally written for CentOS and has been adapted for Fedora 20. 

 Note: This tutorial is designed so you can copy and paste the text inside the boxes. I don't actually type any of this in and neither should you.


1. Getting the network info

This line gets the Network UUID for xenbr0. If you're using a different bridge you will want to insert it here. Get a list of XCP networks with xe network-list. This network is connected to the outside interface. This tutorial requires there to be a DHCP server on this network answering requests and providing network access to the Internet.

NETUUID=$(xe network-list bridge=xenbr0 --minimal)

2. Creating the VM and setting parameters

Here we create the VM from the RHEL6 template, create a network interface and add it to our network from step one. Additional settings are for configuring the install repository and specifying the kickstart file from my site. The last setting turns off VNC so we can watch the install via a text console (very important in my environment).  Even if you can't see all the text below just highlight and paste. The text is there even if it's not visible.

TMPLUUID=$(xe template-list | grep -B1 'name-label.*Red Hat.* 6.*32-bit' | awk -F: '/uuid/{print $2}'| tr -d " ")
VMUUID=$(xe vm-install new-name-label="Fedora20" template=${TMPLUUID})
xe vif-create vm-uuid=$VMUUID network-uuid=$NETUUID mac=random device=0
xe vm-param-set uuid=$VMUUID other-config:install-repository=
xe vm-param-set uuid=$VMUUID PV-args="ks= ksdevice=eth0"
xe vm-param-set uuid=${VMUUID} other-config:disable_pv_vnc=1

3. Starting the VM and watching the install

The VM installs without any interaction from the user at this point. It is however, nice to watch it using xenconsole. Once it's done installing it will shutdown.

If you're using XCP 1.0/1.1

xe vm-start uuid=$VMUUID
DOMID=$(xe vm-list uuid=${VMUUID} params=dom-id --minimal)
/usr/lib/xen/bin/xenconsole ${DOMID}


If you're using XCP 1.5b/1.6 or Xenserver 6.x

xe vm-start uuid=$VMUUID
xe console uuid=$VMUUID


4. Starting the VM and configuring settings

We need to boot the VM up again and using xenconsole log in as root to configure the network and reset the root users password.

If you're using XCP 1.0/1.1

xe vm-start uuid=$VMUUID
DOMID=$(xe vm-list uuid=${VMUUID} params=dom-id --minimal)
/usr/lib/xen/bin/xenconsole ${DOMID}

If you're using XCP 1.5b/1.6 or Xenserver 6.x

xe vm-start uuid=$VMUUID
xe console uuid=$VMUUID

Now that yourFedora VM is running you can login. The password was automatically set by the kickstart file.

Reset the root users password and change the network settings to static IP using system-config-network. If you want to keep the IP assignment dynamic note the ip address.

5. Shutting down the VM and re-enabling VNC

If you're going to use XVP or some other method of connecting to the VMs direct VNC connection you'll need to enable it.

xe vm-shutdown uuid=$VMUUID
xe vm-param-remove uuid=${VMUUID} param-name=other-config param-key=disable_pv_vnc
xe vm-start uuid=$VMUUID


6. Add RPMfusion repository

I almost always install RPMfusion. It is very stable and doesn't replace standard packages.

yum localinstall --nogpgcheck


7. Export our VM for safe keeping

Before you start modifying the base Fedora image you should back it up.

xe vm-export uuid=$VMUUID filename=Fedora20-base.xva


Be aware that you may not have enough space on the Control Domain's disk to export it. A good solution (and shorter than explaining how to add disks to the control domain) is to mount an nfs volume and export it there.

mount nfsserver:/share /media/share
xe vm-export uuid=$VMUUID filename=/media/share/Fedora20-base.xva


This would mount the NFS share on nfsserver to /media/share. The exported disk would be saved on the NFS share.


Notes: Since it's more likely that you will want to do a Fedora desktop install than for the other Operating Systems I've written tutorials for I've put together a list of packages for your custom kickstart file (extracted from the Fedora-20-comps.xml file.)



To insert any of these package groups into your own custom kickstart file precede the group name with an @ and insert it in the Package section.

# Packages
%packages --excludedocs
@ base

Then to use your kickstart file save it to a webserver somewhere. Follow the installation instructions but refer to your kickstart file (ks=<URL> in Step 2. 

xe vm-param-set uuid=$VMUUID PV-args="ks= ksdevice=eth0"